0. GENERAL SAFETY INSTRUCTIONS
Never go under an unsupported drill lifted by hydraulics. Make sure that the pins and cotter pins of
the drawbar are properly fastened and that the drawbar is undamaged in every respect.
Never try to clean, lubricate or regulate a moving machine. Do not allow anyone to stand on the
machine when it is moving.
Do not remove the protecting plates of the power transmission.
Change the hoses and couplings of the hydraulic system, if necessary.
Do not load the lids of the machine.
During transport the hopper should be nearly empty, max. speed 30 km/h.
The front axle weight of the tractor should be at least 20 % of the total weight. Use extra weights, if
necessary.
Should the total machine width exceed 3 m the machine must be transported in longitudinal position
when driving on public road.
