Fig. 8. Locking of CK 3000 B and 4000 C wheel track marker.
3.3.2 Changing the machine from working order to transport CK-4000C
If the machine has not been transported in longitudinal position earlier do as follows: Mount a draw
link to the left wheel, figure 9.
-
Lift up the drill
-
Lock the markers in transport position
-
Mount the transport wheels to the right machine endup
-
Put the pins in the machine end to the holes in the transport wheels
-
Draw from the pin of the lower fastening point
-
Lift the wheels in place
-
Make sure that the wheels are locked in place (see fig. 10)
-
Set the draw link of the left wheel in horizontal position
-
Lower the machine
Fig. 9. Draw link mounted to the wheel hub for transport in longitudinal position.
