Fig. 10. Transport wheels fastened to the wheel hub and end plate.
Detaching the drill from the tractor
-
Disconnect the cables and ropes of the optional equipment in the cab
-
Disconnect the hose of the marker changer
-
Lift the crossbar, pull the releasing rope and let the crossbar down
-
Cables, ropes etc. are placed in a suitable safe place for transport
-
Remove the crossbar from the lower links and put them e.g. into the hopper
-
Connect the drawbar to the three-point-linkage of the tractor (figure 11)
-
Fasten the check chains in fixed positions
-
Reverse the draw pin of the drawbar precisely under the draw link in the hub of the left
wheel (the draw link must bein horizontal position) and lift the drawbar up,f ig. 12. The
machine is now ready for transport in longitudinal position.
Fig. 11. Drawtriangle mounted to tractor’s 3-point-linkage.
NOTE. During transport in longitudinal position the hopper load must not exceed 20 % of the
max.load.
