Page 18
Step 151:
Laminate LG struts together using
medium CA as shown
Step 152:
Apply LG strut template as shown
with 3M77
Step 153:
Cut and drill LG Strut to length
according to tempalte as shown
Step 156:
Assemble LG parts as shown.
Install nylon bolt and nut for main LG pivot.
Step 154:
Mount wheels with 1-1/4” steel
bolts and nuts.
Step 155:
Make 4 LG support pieces from
template in similar fashion.
Step 157:
Insert carbon tube to locate support
inserts as shown
Step 158:
Glue support inserts to one support
plate with CA and kicker as shown
Repeat Steps for
other LG Strut
also
Drill holes first
Heavy duty tin snips
may be used to cut
parts from template
Be careful not to
glue carbon tube yet!
Just use it to locate
the spacers and
remove before glue
sets.
Step 159:
Glue support to make “sandwich” as
shown with CA and kicker
Be careful not to
glue carbon tube yet!
Just use it to locate
the spacers and
remove before glue
sets.
Step 160:
Glue the 1/8” fiberglass rod into the
the LG support as shown
join sanded
sides together
