Tuchel Snow blade SF, Руководство по эксплуатации

Страница: 20 / 59

Safety notes
Page
2-8
•
Before working on the hydraulic system:
ο
lower the attachment,
ο
safeguard parts of the attachment which are raised from unintentional lowering,
ο
depressurise the hydraulic system,
ο
turn off the engine of the machine,
ο
apply the parking brake,
ο
remove the ignition key!
•
Have the hydraulic lines checked by an expert at least once a year in order to ensure that they
are in a safe working condition!
•
Replace hydraulic lines if they are obviously defective, damaged or old! Always use original
hydraulic lines!
•
The six year usage duration of the hydraulic lines must not be exceeded, including a maximum
possible storage time of two years!
Even though they are stored properly and only subjected to the permissible loads, hoses and
hose connections are subject to natural ageing, therefore their storage time and usage duration is
limited. The usage duration can differ from this in accordance with empirical values, particularly
taking the hazard risk into consideration. The same guideline values apply for hoses and
hydraulic lines made from thermoplastics.
•
Never try to seal up leaking hydraulic lines using your hands or fingers!
Liquids (hydraulic oil) escaping under high pressure may penetrate the skin and cause severe
injuries!
In the event of injuries caused by hydraulic oil, seek immediate medical attention! Danger of
infection!
•
Do not use your bare hands to detect leaks because of possible severe risk of infection! Use a
suitable aid when looking for leaks (cleaning spray, special leak-finding spray)!
2.4.3 Attachment
•
Only one person may operate the attachment! Remove bystanders from the hazard area of the
attachment!
•
The following is strictly prohibited:
ο
climbing onto the upper edge of the receptacle,
ο
climbing or reaching into the receptacle with the engine of the machine running!
•
No person may be present in the work area of the attachment!
Danger due to objects being flung out of the discharge opening.
•
Remove all persons from the work area of the attachment before operating it!
•
Do not place any foreign objects into the receptacle!