Tuchel Snow blade SF Скачать руководство пользователя страница 17

Страница: 17 / 59

Safety notes

Page

2-5

2.3.5

Warranty and liability

Our general "Terms and conditions of sale and delivery" apply. These are handed to the owner upon
conclusion of the contract at the latest.

Warranty and liability claims for injuries and property damage are ruled out if they are attributable to
one or more of the following causes:

•

improper use of the attachment,

•

incorrect mounting, starting-up, operating and maintaining of the attachment,

•

operating the attachment with defective safety devices or improperly mounted or inoperable
safety and protection equipment,

•

failure to follow the instructions in the operating manual regarding starting-up, usage and
maintenance,

•

unauthorised structural modifications to the attachment,

•

inadequate monitoring of device components which are subject to wear and tear,

•

incorrectly made repairs,

•

catastrophic events caused by third party intervention or acts of God.

2.4

Basic safety notes

Basic safety notes:

•

always applicable for safe operation of the attachment.

•

summarised in the following subsections.

2.4.1

General safety and accident prevention information

•

Also observe the generally valid national safety and accident prevention regulations as well as
the safety notes in this chapter!

•

Wear personal protection equipment when working on the attachment!

•

Observe the warnings and instruction notes on the attachment. Important information for safe and
fault-free operation of the attachment can be found there!

•

As well as the basic safety notes in this chapter, please also observe the action-related safety
notes in the other chapters!

•

Remove people from the vicinity of the attachment before putting it into operation! Look out for
children in particular!

•

Do not carry people or transport objects on the machine! Carrying people and transporting
objects on the attachment is prohibited!

•

Adapt your driving so that you are always in control of the machine with the attachment attached
at all times!

Take your personal skills, the road, the traffic, the visibility and the weather conditions, the driving

characteristics of the machine and the influence of the attached attachment into consideration
when doing this.

Содержание Snow blade SF




























































Результаты поиска

Содержание Snow blade SF

Отзывы:

Бренды по названию

Популярные бренды

Tuchel Snow blade SF, Руководство по эксплуатации

Результаты поиска

Содержание Snow blade SF

Отзывы:

Бренды по названию

Популярные бренды