![Tuchel Snow blade SF Скачать руководство пользователя страница 21](http://html.mh-extra.com/html/tuchel/snow-blade-sf/snow-blade-sf_operating-manual_1179287021.webp)
Safety notes
Page
2-9
2.4.4
Cleaning, servicing and maintenance
•
Carry out the required work for cleaning, servicing and maintenance when it is due.
•
Safeguard the machine and the attachment from unintentional start-up and rolling away before
cleaning, servicing or maintaining the attachment!
•
Any residual energy present in the mechanical or hydraulic electronics may cause unintentional
movement of the attachment.
Be aware of the presence of residual energy in the attachment when carrying out service and
maintenance work. Components potentially carrying residual energy are marked with warnings.
Detailed notes can be found in the respective chapters of this operating manual.
•
Safeguard all operating materials such as hydraulic oil from unintentional start-up.
•
Carefully fasten and secure large assemblies to lifting gear before replacing them.
•
Regularly check that screws and nuts are firmly seated! Tighten up any loosened screws and
nuts!
•
Secure the raised attachment and raised attachment components to prevent unintentional
lowering before cleaning, servicing or maintaining the attachment!
•
Use suitable tools and gloves when replacing work tools with sharp edges!
•
Check all loosened screw connections to ensure they are firmly seated. Check the operation of
safety equipment and protective equipment after completing maintenance work.
•
Oil, grease and filters must be disposed of properly!
•
The substances and materials that are used for cleaning the machine, must be handled and
disposed of properly, particularly:
ο
when working on lubrication systems and equipment,
ο
when cleaning with solvents.
•
Disconnect the cable from the alternator and the battery of the machine before carrying out
electrical welding work on the machine and the attached attachment!
•
Spare parts must at least meet the specified technical requirements of the manufacturer! This is
always the case when using original parts!
•
Pay attention to the maintenance intervals of wearing parts!
Содержание Snow blade SF
