Tuchel Snow blade SF, Руководство по эксплуатации

Страница: 30 / 59

Coupling and uncoupling of the attachment
Page
4-2
4.2 Attaching the SF snow blade
WARNING
Risk of crushing and collision for persons can occur if persons
are present between the machine and attachment when coupling
the attachment!
Remove persons from the hazard area between the machine and the
attachment before moving towards the attachment.
Assistants who are present may only act as guides next to the
machine and the attachment and may only move between the
vehicles when they are at a standstill.
WARNING
Risk of crushing, pulling in, catching and collisions for persons
if the attachment inadvertently becomes detached from the
machine!
•
Observe the maximum permitted support, attachment and axle
loads of the machine.
•
Use and secure the devices provided for connecting the machine
and the attachment appropriately.
•
Before setting off with the attachment connected, check whether
the quick change receptacle is correctly locked to the four-point
attachment frame.
4.2.1 Quick-change
•
Observe attachment safety notes listed in chapter
4.2!
•
Described and presented here as an example is
a quick-change attachment version.
•
Check the quick change receptacle and carrier
vehicle receptacle for soiling and clean if
necessary.
WARNING
Risk of loss of energy supply between machine and attachment
due to damaged supply lines!
Pay attention to the routing of the supply lines when they are being
connected. The supply lines:
•
must give way slightly without any tension, kinking or friction,
•
must not chafe against external parts.