Tuchel Snow blade SF страница 16 Скачать руководство пользователя | Manualshive

Страница: 16 / 59

background image

Safety notes

Page

2-4

2.3

Product safety

2.3.1

Safe operation of the attachment

The attachment equipment may only be operated by a person in the driving seat of the machine if
there are no persons in the hazard area of the machine. For more information, please refer to chapter
"Hazard areas and danger points", page 2-16.

2.3.2

Safety and protective equipment

•

Only operate the attachment if all safety and protective equipment has been properly attached
and is fully functional.

•

Faulty or removed safety and protective equipment can lead to dangerous situations.

•

Check all safety and protective equipment for external damage and functionality before putting
the attachment into operation.

2.3.3

Structural changes

•

You may only make structural changes, attachments and modifications to the attachment if you
have written approval from the manufacturer.

•

The declaration of conformity and CE label of the attachment will lose its validity if any
unapproved structural changes, attachments or modifications are made.

•

Only use original parts or modification and accessory parts that have been approved by the
manufacturer, so that:

ο

the declaration of conformity and the CE label of the attachment retain their validity,

ο

perfect functionality of the attachment is guaranteed.

•

The manufacturer is not liable for damage caused by:

ο

unauthorised changes made to the attachment,

ο

use of non-approved modification and accessory parts,

ο

welding and drilling work on supporting parts of the attachment.

2.3.4

Spare and wearing parts and auxiliary materials

Immediately replace parts which are not in perfect condition.

Only use genuine parts from the manufacturer or parts approved by the manufacturer. When using
spare and wearing parts from third-party manufacturers, it is not guaranteed that they are designed
and manufactured for the relevant stress and safety demands.

The manufacturer assumes no liability for damage caused by using unapproved spare and wearing
parts or auxiliary materials.

«
...
14
15
16
17
18
...
»

Содержание Snow blade SF




























































Отзывы:

Нет отзывов

Похожие инструкции для Snow blade SF

Бренд: Tacx Страницы: 2

Бренд: C.E. Nierhoff & Co Страницы: 7

Бренд: K&K Страницы: 8

Бренд: Tascam Страницы: 8

Бренд: B-K lighting Страницы: 5

Бренд: B-K lighting Страницы: 4

Бренд: B-K lighting Страницы: 3

Бренд: Abicor Binzel Страницы: 92

Бренд: Haag-Streit Страницы: 18

Бренд: Haag-Streit Страницы: 20

Бренд: V-TEK Страницы: 2

Бренд: V-TEK Страницы: 112

The Wave Transformer

Бренд: EarthQuaker Devices Страницы: 21

Бренд: Yamaha Страницы: 48

Бренд: Yamaha Страницы: 85

Бренд: Yamaha Страницы: 43

Бренд: Yamaha Страницы: 200

Бренд: Accurate Technology Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды