Tuchel PLUS 560, Руководство по эксплуатации

Страница: 54 / 102

Cleaning, servicing and maintenance
6-48
6.2.1 Replacing brush rings
The safety regulations from chapter 4.2 apply.
•
Raise the sweeper (approx.
200 mm) and open dirt hopper.
➔
Secure sweeper and
carrier vehicle against
inadvertent starting,
rolling or lowering.
•
Close shut-off valve (1) for the
emptying- cylinder (Fig. 6.1)
(must face the rear support
wheel).
1
•
Set the adjustment-lever
system (2) on both sides to the
lowest position (Fig. 6.2).
•
Lower sweeper until the
complete brush shaft is on
the ground.
➔
Depressurise the sweeper
hydraulic lines from the
carrier vehicle.
•
Loosen the screws (3) of the
hydraulic motor (4) and the
bearing (5) and remove
(Fig. 6.3.)
Fig. 6.1
2
Fig. 6.2
4
3
5
3
Fig. 6.3