Tuchel PLUS 560, Руководство по эксплуатации

Страница: 18 / 102

Safety information
2-12
•
Ensure that the following values are not exceeded when coupling the sweeper to the front of the
vehicle:

The permissible overall weight of the vehicle,

The permissible axle loads of the vehicle,

The permissible support load at the point of coupling of the vehicle,

The permissible trailer load of the coupling attachment,

The permissible tyre load capacity of the vehicle.
•
Secure the vehicle and sweeper against rolling away before coupling or uncoupling the sweeper.
•
Persons are not permitted to be between vehicle and sweeper when the vehicle moves towards
the sweeper.
Those present may only be there to give directions next to the vehicles and are only to step
between the vehicles when the latter are stationary.
•
During coupling and uncoupling, secure the required support equipment into the support position
(stability).
•
When activating the support equipment, be aware of the danger of crushing and shearing action.
•
Be particularly careful when coupling to or uncoupling the sweeper from the vehicle. Between the
vehicle and the sweeper there are points where crushing or shear-action could occur in the area
around the couplings.
•
Persons are not allowed to be positioned between the vehicle and sweeper when operating the
three-point hydraulics.
•
Check the coupled supply lines. Coupled supply lines:

must be able to easily accommodate all movements when driving round curves without tension,
bending or rubbing.

must not rub against other components.
•
Always position the uncoupled sweeper so that it is stable (cannot fall over).
b) Use of the sweeper
•
Before starting work, familiarise yourself with all the equipment and operating elements of the
sweeper as well as with their functions. Trying to do this while working on it is too late
•
Wear tight-fitting clothing. Loose clothing increases the danger of catching onto or winding round
drive shafts.
•
Operate the attachment only if all protective devices have been fitted and positioned to provide
protection.
•
Note the maximum loading of the sweeper and the permissible axle and support loads of the
vehicle. If possible, drive with only partly filled load compartment.
•
The presence of persons is prohibited:

in the working / hazard area of the sweeper,

in the dirt ejection region of the sweeper,

within the rotation and swinging areas of movable parts of the sweeper,

under raised and unsecured movable parts of the sweeper.