Tuchel PLUS 560, Руководство по эксплуатации

Страница: 35 / 102

Coupling and uncoupling the sweeper
4.2.5 Fork-arm attachment
4-29
•
The safety regulations from chapter 4.2 apply.
•
Check fork-arm attachment and fork arms for contamination and clean if
necessary.
•
The distance between the forks must be set before approaching it to the
carrier vehicle.
•
Pull the knob (1) on both sides of
the fork-bar attachment towards
the curved guard (2) and swing it
upwards until it locks in the groove
(3). The safety bracket (4) now
points towards the ground.
3
•
Guide the fork arms fully into
the attachment.
•
Put safety bracket (4) back into
2
horizontal position.
➔
The lever ratchets back
into the hole (Click).
4
1
Fig. 4.7
•
Adjust distance (A) to the width of
4
8
A
7
5
6
the fork arms:
•
Remove screws (5) on both sides.
Adjust the safety bracket (4) to
required width. Screw the screws
back in, from the bottom into one
of the holes (6) and re-tighten.
•
In addition, the fork-arm
attachment must be secured by a
chain (7):
•
The chain must be passed taughtly
through the loop on attachment (8)
and on the slider on the carrier
vehicle and secured with the snap
hook.
Fig. 4.8
➔
The chain must not come
into contact with the guides
of the lifting frame.
➔
Check correct locking of the
safety bracket behind the
fork arms.
➔
Ensure the taught seating of
the chain.