TSI Instruments EVM SERIES, Руководство пользователя

Страница: 49 / 178

Setting up Parameters via the Keypad
Auto-run
EVM Series User Manual
39
5. In the timed-run screen, press Enter
to select the duration field which is displayed in hours,
minutes, and seconds. To change the duration, press
▲
/
▼
Arrows . To move between the fields,
press
◄
/
►
Arrows . (Repeat as necessary).
Duration

Select the hours/minutes/seconds with up/down
arrows and press
Enter to move to the next field.
Figure 3-23: Setting timed-run and duration
6. Press Enter
to save your settings.

NOTE : To begin the Timed-run, press the run/stop key and the instrument will automatically
stop at the programmed duration.
Auto-Run with Date Mode
With the date mode, it will wake up the instrument from a powered down or on condition, runs the study,
saves it, then powers down again. Up to four date settings are programmable with a specified date, time
(in hours, minutes, seconds), and duration via the soft keys.
 Setting auto-run with date mode
1.
From the Start screen, select and open the Setup screen.
2.
Select Auto-Run by pressing
▲
/
▼
Arrows and press Enter .
3.
Press Enter
to select the 2nd column (value field) and press
▲
/
▼
Arrows repeatedly until
Date appears.
4. Next, press one of the soft keys. (This will open a Date/Auto-Run screen.)
Soft keys

Select a soft key to setup the Date Auto-Run
parameters

Once set, “-one” will appear as “+one” which is
turned on.
Figure 3-24: Selecting auto-run with date mode