TSI Instruments EVM SERIES, Руководство пользователя

Страница: 34 / 178

Setting up the Environmental Monitor
Setting up Parameters via the Keypad
EVM Series User Manual
24

Set logging intervals, logging attributes, and view run time
1. From the start menu, press ▲ / ▼ Arrows to select Setup and press Enter . Select Logging
and press Enter
.
2. To change Logging Interval or Averaging follow below:

Press
▲
/
▼
Arrows to select Logging interval or Averaging.

Press Enter
to move to the changeable field, and then press
▲ / ▼ Arrows.

Press Enter
to return to the 1
st
column and save your settings.
3. To enable/disable logging, follow below:

Select a measurement by pressing ▲ / ▼ Arrows .

Once selected, press Enter (this will move your cursor to the “On/Off” field.)

Press ▲ / ▼ Arrows to toggle and select On or Off .

Press Enter
again to return to the measurement.

Repeat step 3 until all logging parameters are enabled/disabled.
Logging time/averaging time
Logging attributes/measurements
Run Time
When selected, the estimated run time screen
displays the total remaining time.
Figure 3-5: Logging screen