TSI Incorporated PORTACOUNT PRO+ 8038, Руководство по эксплуатации и обслуживанию

Страница: 51 / 107

Conducting a Fit Test with the PortaCount Pro Respirator Fit Tester 45
Advanced
Database Tools
Description
Statistics Allows the advanced user to determine how many
records of each type (people, respirators, protocols,
fit test results and daily checks) are in the selected
database file and reports the file size in bytes.
Clean Copy
Allows the advanced user to make a “clean” copy of
an existing database file. A “clean” copy retains the
people, respirator, protocol, and daily check records,
of the original database, but does not copy fit test
results. This tool can be used when your working
database file is becoming too large to create a
second, working copy.
Copy Allows the advanced user to make a copy of an
existing database file. One typical use might be to
cr
eate a “master database” using software
that contains commonly used respirator and protocol
information, then using “
Copy
” to make working
copies that you can customize by adding people,
additional protocols or respirators using the
PortaCount Fit Tester user interface as needed.
Save This command writes the database that is active in
memory to a file on the flash drive. This is usually
not necessary because the file is saved
automatically at the end of each test, but can be a
useful tool in some situations. For example, in the
unlikely event that your primary flash drive fails and
you receive an error message that the data was not
saved, you could swap out the primary drive with a
backup and use “
Save
” to write the database from
memory to the backup flash drive. You could then
continue working with the backup flash drive in
place.