TSI Incorporated PORTACOUNT PRO+ 8038, Руководство по эксплуатации и обслуживанию

Страница: 49 / 107

Conducting a Fit Test with the PortaCount Pro Respirator Fit Tester 43
At the top of that menu, select Print to print a report of the fit test
that was just completed.
Note
If the test is stopped by the user before it completes, or if it fails
due to a fault condition such as low ambient concentration, the
fit test will not be saved to the database and will not be available
for printing, unless the
option to “save all fit test” results has
been enabled under Global Settings . See Chapter 5 for further
information.
2.
In the “Fit Test Reports” screen, available through the “Database”
page, you can print Fit Test Reports for records that you select
from the currently loaded database.
It is also possible to configure the PortaCount Pro to print fit test
reports automatically at the end of each fit test. Refer to
Chapter 5 for
more information on adjusting these options in the Global Settings
menu.
Step 7
—Stand-Alone Fit Testing—Data Handling
Best Practices
TSI’s
PortaCount Pro Respirator Fit Tester is designed to provide a
robust solution for stand-alone fit testing. As with any computing
application, care must be taken by users to ensure that precious data
is not lost due to mishap or mishandling. This section recommends
some basic and advanced guidelines for good data handling and
instructions on how to use the PortaCount Pro fit tester
“Advanced
Database Tools” introduced in firmware version 2.0.

In stand-alone mode, all important fit test data
is stored on the removable media device (flash
drive) that is connected to the PortaCount unit.
Note
The flash drive provided with the
PortaCount Pro fit tester does
not include
the necessary PortaCount Pro database.
This must be created through the
software, please refer to the
software user’s manual.

Do not lose or damage the flash drive! All fit test data is stored in
files on the flash drive.