TruVision TVB-5412, Руководство по настройке

Страница: 77 / 90

TruVision ANPR IP Camera Configuration Manual 75
2. Enter the device number, camera number and camera information.
Note : The device number can also be changed under Basic Information . See page
18.
3. Click Save to save changes.
Black and white lists
You can store a list of black and white entries on the camera to match against when
automatically analyzing the captured numbered plates. By default, a list of maximum
2,048 license plates can be loaded in the camera. There is an option to increase this to
a maximum 10,240. See Table 1 below.
Table 1: Description of Black list, White list, and Other
Black listed These are license plates marked in the list as restricted vehicles.
White listed These are license plates marked in the list as authorized vehicles.
Other Captured license plates that are not part of the list are automatically marked as
“Other”.
If you do not have already a list of your black/white license plates, you can export the
template to create one. It can then be imported back to the camera. It is one single list
in which you mark your license plate as white or black listed. Captured license plates
that are not part of the list will automatically be marked as “Other”.
The template format is shown below. When inputting the license plate number and ID,
there should be no spaces between the letters and numbers. For example, if the actual
license number plate is “1-DKS-140”, in the list it should be written as “1DKS140”. See
Figure 13 below. When entering 0 in column C, the license plate will be marked as
black listed. Entering 1 in column C marks the license plate as white listed.