TruVision TVB-5412, Руководство по настройке

Страница: 74 / 90

72 TruVision ANPR IP Camera Configuration Manual
4. Set the Select Mode . When enabled, this function uploads the license plate
information when a vehicle passes the selected detection area and triggers
detection. Select one of the following options:
Entrance/Exit When a vehicle is detected in an entrance or exit area, its license plate
number is captured, and the information uploaded to the camera for
analysis.
City Street When a vehicle is detected in a city street, its license plate number is
captured, and the information uploaded to the camera for analysis.
Custom Set the time interval between when a vehicle is initially detected and
uploading the license plate into the system. The lower the interval, the
higher the speed of the vehicle.
You can select a time interval between 1 and 15,000 ms.
Alarm Input An input alarm triggers the capture of a license plate number and the
information uploaded to the camera for analysis.
Note : When Alarm Input is selected, the alarm input "A<-1" is
automatically assigned to trigger vehicle detection. Its alarm type is
always NO. If the "A<-1" alarm input is used to trigger vehicle detection, it
can not be used for other basic events. When
Alarm Input is selected and
saved, any previously configured linkage methods for "A<-1" are
canceled.
5. Go to Arming Schedule to set up the schedule and linking method for white lists,
black lists, and other lists.
Set the arming schedule and linkage action for the white list, the black list, and the
other list.