TRUST 760 POWERC@M CCD
STANDARD CAMERA OPERATION
The following chapters explain how to take a photograph, how to view the photograph
on the camera and how to save the photograph on a computer.
6 Taking
photographs
1.
Slide the On/Off switch (2, figure 4) to the right and keep it in that position for
1 second. The green indicator (8, figure 4) will flash.
(Repeat this to turn the camera off.)
2.
Release the switch. A melody will be heard after a couple of seconds. The
camera has now been turned on.
3.
Set the camera to the ‘Capture’ mode (symbol: ) using the rotary button (2,
figure 1).
4.
Look through the viewfinder or at the image displayed on the LCD screen and
search for the image or object that you wish to photograph. The viewfinder in
the image in white.
5.
Press the exposure button (1, figure 1) as far as possible. The photograph will
now be taken. The green LED will start to flash.
6.
Repeat points 4 and 5 to take more photographs.
Note:
‘Low light’ will be displayed on the LCD screen when there is
insufficient light to take a good quality photograph.
It is recommended to set the flash to ‘Automatic’ or ‘Fill-in’ (see chapter
10.4).
Note:
The image is first brought into focus before the photograph is taken.
This will take a short period of time. Take this into account when taking
an action photograph.
7
Viewing photographs and video clips
Note:
The camera must be turned on.
1.
Use the rotary button to set the camera to the ‘Playback’ mode (symbol:
).
The last photograph or video clip will be displayed on the LCD screen.
2.
Press the control button up or down to go to the previous or next photograph
or video clip.
8
Connecting the camera to a computer
(PC/MAC)
The software must be installed before connecting the camera to a computer.
8.1
Installing the driver in Windows 98 / Windows ME /
Windows 2000 / Windows XP
Note:
If you use a Macintosh, you can ignore this chapter and continue from
chapter 8.2.
Note:
The latest driver can be downloaded from www.trust.com/13792.
Check whether a new driver is available and use this for the
installation.
6
