TRUST 532AV POWER VIDEO
26
NiCd batteries are
used.
Use Alkaline or rechargeable NiMH
batteries.
The camera has not
been used for more
than 1 minute.
Turn the camera on again.
The camera
suddenly turns
itself off.
The power in the
batteries is low.
Replace the batteries.
The mode button has
not been pressed for
long enough.
Press the button for at least 5
seconds.
The camera
cannot be turned
on or turns off
immediately.
The batteries are
empty.
Replace the batteries.
A low resolution is
used.
Select the video format (320 x 200)
(see chapter 7.1.4).
The webcam
image is not
clear.
The subject being
filmed is very close by.
Select the macro setting (see
chapter 4.6.5).
The camera was
moved when
recording.
Try to hold the camera still or use
the stand.
The macro setting is
still selected whilst the
distance to the object
is a number of metres
away.
Turn off the macro setting (see
chapter 4.6.5).
The distance to the
subject is too short.
Increase the distance to the object
to be photographed or select the
macro setting (see chapter 4.6.5).
The recordings
are not clear
(hazy).
There is insufficient
light.
Improve the lighting.
The camera is busy
recording video or
audio.
Stop recording.
The camera menu is
active.
Turn the menu off (see chapter
4.5).
The memory is full.
Transfer photographs to your
computer and delete them from the
memory. You can take many more
photographs using a (larger) CF
card. Ask your dealer.
No photograph is
taken when the
exposure button
is pressed.
The camera is still
busy saving the
previous photograph.
The LED is lit.
Wait until the LED goes out.
There is no
connection with
the computer.
The camera has been
connected incorrectly.
Reconnect the cables.
The camera does
not give an image
in the application
(webcam).
Another application is
open and is using the
camera image.
Close the other application first
before starting the test program.
