TRUST 532AV POWER VIDEO
7
U K
L (Low)
Low
Resolution is 640 x 480 (VGA).
H (High)
High
Resolution is 1600 x 1200 (2.0M pixel).
Table 7:
Summary of the symbols used on the LCD screen to indicate the
photograph resolution
4.6.2 Quality
You can take photographs in a high and a low quality using the TRUST 532AV
POWER VIDEO. The resolution remains the same, but twice as many photographs
can be saved in the memory by using a higher compression. However, a higher
compression may cause distortion in the image. When the camera is turned on, it is
set to high quality. Carry out the following if you wish to set the camera to the low
quality.
1.
Look at the LCD screen.
2.
Scroll to the quality symbol (6 in figure 2b).
3.
Press the menu button for a short period. The quality will be set to low. If the
quality was already set to low (small star), the quality will now be set to high
(large star).
If the camera is turned off, it will be set to the high quality again when it is turned
back on.
4.6.3 Video
standard
The TRUST 532AV POWER VIDEO has a video output. The default setting is for
use in Europe (PAL). If you wish to connect the camera to a TV in the USA, set the
output to NTSC.
1.
Look at the LCD screen.
2.
Scroll to the TV symbol (11 in figure 2b).
3.
Press the menu button for a short period. The camera will be set to NTSC
and will restart. The LCD screen may flash.
Repeat the procedure to return the camera to the PAL setting. The setting will
remain the same when the camera is turned off. This setting can also affect the
video and webcam image. Leave this option set to the PAL standard if you use the
camera in Europe or other countries which use the PAL standard. The camera
cannot be configured for the French SECAM system.
4.6.4 Macro
setting
Objects photographed at a distance of less than 2.5 metres are not sharp. Use the
macro setting to make these photographs sharp. This setting works up to a minimum
distance of 40 cm. Objects photographed at a distance greater than 2.5 metres will
not be sharp when the macro setting is selected. Select the macro setting as follows.
Macro setting
1.
Direct the camera towards the object that you wish to photograph.
2.
Rotate the lens ring anticlockwise. You will feel two clicks, one when it exits
the
normal
setting and one when the macro setting is reached. The arrow on
the lens ring will now be pointing at the flower symbol.
Normal setting
1.
Direct the camera towards the object that you wish to photograph.
2.
Rotate the lens ring clockwise. You will feel two clicks, one when it exits the
macro setting and one when the normal setting is reached. The arrow on the
lens ring will now be pointing at the mountain symbol.