TRUST 532AV POWER VIDEO
13
U K
Note:
The camera’s AV output is not suitable for connecting to the aerial
connection on your TV. Your TV must have a video input.
Tip
:
If you do not see an image and hear a loud humming sound through
the speakers, then you may have connected the image and audio
plugs to the wrong connections. Swap the image and audio plugs and
try again.
5
Installing the software
5.1
Removing old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old device. The best solution is to first remove all drivers related to old
devices before installing the new driver. Make sure you only delete programs for old,
unused (similar) devices.
Old drivers for webcams, TV cards and video editing cards can affect with the
webcam function (live image).
1.
Enter the Windows ‘Safe Mode’ (press F8 when starting Windows and then
select ‘Safe Mode’ from the menu which will be displayed).
2.
Click on ‘Start – Settings – Control Panel’ and double-click on the
‘Add/Remove Programs’ icon.
3.
Find all the programs for similar, old devices and remove these by clicking on
the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some
programs to appear twice. In that case, remove all the programs which
appear twice.
4.
Restart the computer.
5.2
Installing the driver in Windows 98SE / Windows ME /
Windows 2000 / Windows XP
Note:
Windows XP and Windows 2000 users: The instructions given below can
only be carried out if you are logged on as ‘Administrator’.
Note:
This device has not been designed to work in Windows 98 (Windows 98
SE not included). Although some functions will work, stable operation is
not guaranteed. The device
does not
work in any versions of Windows
95.
Tip:
The latest driver can be downloaded from www.trust.com/13338. Check
whether a new driver is available and use this for the installation. The
current version of the driver is included on the Trust Installation CD-
ROM.
Note:
Make sure all other programs are closed during the installation.
Note:
During installation in Windows 2000 and Windows XP, you may receive
a message saying that the driver has not been signed. This does not
cause a problem for the functionality.
Note:
In the example, ‘D:\’ is used to indicate the CD-ROM drive. This may be
different for your computer.
1.
Insert the CD-ROM from the CD-ROM set into your computer’s CD-ROM
drive. The installation program will start automatically. If it does not start
automatically, carry out the following:
a)
Select ‘Run’ from the Start menu.
b)
Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software
Installer.
2.
The Trust Software Installer window will appear See figure 11.
