Trumpf BEO D50, Руководство оператора

Страница: 34 / 38

As the laser device user, only employ trained or instructed staff.
Clearly specify the individual responsibilities of the persons for
operation, setup and servicing.
As the user, you are obliged to report the operation of class 3B
and class 4 laser products to the authorities responsible for
laser safety.
If you have any questions , contact the local sales office of
TRUMPF.
According to the rules of electrical engineering, any work on the
electrical system of a laser product may only be carried out:
■ by an electrician.
■ by instructed persons under the supervision and guidance of
an electrician.
6.4 Observing standards and regulations
Some important standards and regulations which you have to
observe when operating a laser product are listed in the follow-
ing table. This list is for information purposes only and probably
incomplete.
As the operator, you are responsible for ensuring that the stand-
ards and safety regulations in force in your region are observed
as far as they are mandatory.
EN 60825-1
IEC
60825-1
Safety of laser products
Radiation safety of laser products
EN 207 Filter and safety glasses against laser radiation
(laser safety glasses)
EN 60204-1 Electrical equipment of machines
Tab. 1-2
6.5 Behavior in certain operating stages
Operate the laser product only when all protective and safety rel-
evant devices, - e.g. Emergency Stop equipment, protective cov-
ers, safety contacts, exhausters - are in place and fully opera-
tive.
Open the safety circuit of the light path in question when an
error occurs. Have any defects eliminated immediately.
Service work may be carried out by trained personnel only.
1 ‐ 22
Measures of the user 2020-01 22-50-17-CRen
Selecting and qualifying
personnel
Registering the laser
product
Skilled electrician
International standards
Standard operation
Maintenance