Trumpf BEO D50, Руководство оператора

Страница: 35 / 38

For maintenance and repair, open the safety circuits of all
affected light paths and make sure that they remain open for the
entire duration of the work.
Before working on the electrical system of the laser product,
turn the main switch OFF. Lock the main switch in this position
using a shackle padlock.
Carry out the adjustment, maintenance and service work stated
in these operating instructions in due time. Observe information
regarding the replacement of parts.
Check the correct functioning of the safety devices of the laser
product regularly.
6.6 Behavior in case of emergency
Emergencies are understood here as meaning:
■ Laser light exits unexpectedly.
■ A part of the machine in which the laser product is operated
makes uncontrolled movements.
■ A fire or explosion can be triggered.
■ Substances which may affect health are leaking.
If it must be expected that these or similar events may injure
persons or damage material, appropriate measures must be
taken.
If an emergency was caused by the laser product, press an E-
Stop push-button to stop laser light emission and movements
of the machine.
Further measures depend on the situation.
As the user of the laser product, TRUMPF recommends you
identify the possible hazards in a risk analysis and define suita-
ble measures to diminish these or personal first-aid measures.
Prepare an operating instruction establishing what to do in an
emergency. Attach the operating instruction in the dangerous
area in a way that everyone can read.
6.7 Selecting and qualifying personnel
Only use trained and instructed staff.
Define the responsibilities on the laser product for:
■ Setup
■ Operation
■ Maintenance
22-50-17-CRen 2020-01 Measures of the user
1 ‐ 23