Note:rubber wheels oleo struts
and retracts are optional.
LockNut(4mm)
Bushing (8X4mm)
6mm
Rib template (2mm ply)
Rib template (2mm ply)
Wood dowel (6x50mm)
Wood dowel (6x50mm)
4
Wood dowel (6x50mm)
1
Rib template (2mm ply)
Wheel (115mm)
1
Stab joiner (30x680mm)
12
TP Screw (2.3x12mm)
6mm
1.5mm
TP Screw (2.3x12mm)
TP Screw (3x20mm)
Washer(3x6mm)
1.8mm
12
TP Screw (3x20mm)
12
Washer(3x6mm)
Assemble the wheels to the retracts.
Assemble the retracts to the main wing carefully.
Assemble the wheel cover as illustration.
Epoxy the wheel cover to appropriate position
around the retract as illustration.
According to the rib template drill holes in the wing
root and epoxy wood dowels in them.
According to the rib template drill holes in the fuselage.
4
21
20
19
16
18
17
1.5mm
TP Screw (2.3x8mm)
8
TP Screw (2.3x8mm)
8
Ply (15x15x3mm)
Ply (15x15x7mm)
130mm
90mm
5mm
2
Ply (15x15x7mm)
32.5mm
32.5mm
2
Plastic tube(5x50mm)
130mm
90mm
5mm
15mm
Epoxy plies appropriate position inside the
fuselage as below and assemble the cowling.
TP Screw (2.3x8mm)
1.5mm
7
TP Screw (2.3x8mm)
7
Ply (15x15x3mm)
Drill two holes to the relevant position in the airplane
for assembling the drop tank.
Epoxy the drop tank to the bottom cover.
Epoxy plies to the cockpit and assemble the canopy
to it with screw and epoxy.
Epoxy plies to appropriate position inside the fuel
tank and drill holes through them.
Epoxy two parts and the plastic tubes in the holes.
68
67
70
71
69
13
72
