TP Screw (3x20mm)
Collar (6mm)
Wooden supporter
Collar (6mm)
1
Tail gear mount
Collar (3mm)
2
1
1
Tail landing gear(3mm)
Tail wheel (45mm)
Washer (3x6mm)
4
1
Wooden Block (9mm Ply)
1
Wooden Block (3mm Ply)
2
Steel wire (0.5x3000mm)
Wooden Block(63x60x35mm)
2
4
Collar (6mm)
Wheel (115mm)
Landing gear (6mm)
2
1
8
2
TP Screw (3x20mm )
Landing gear straps
Tail wheel (45mm)
Collar(3mm)
Collar(3mm)
Collar(3mm)
Tail landing gear
Tail gear mount
The sketch map when assemble the tail landing
gear to the wheel steeling mount.
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
TP Screw(3x20mm)
Washer (3x6mm)
TP Screw(3x20mm)
Washer (3x6mm)
4
4
1
1
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
Assemble the wheel mount to the thick wooden block
with screw,cut the surplus parts and epoxy the thinner
wooden block to it as illustration.
Wheel (115mm)
2
Steel wire (0.5x3000mm)
wheel mount servo
Steel wire (0.5x3000mm)
Epoxy the whole wheel mount set to the form in the
fuselage and be carefule don't let the arm touch the
fuselage when it works
Assemble the wheels to the standard undercarriages.
Epoxy the standard undercarriages to the wings.
14
76
73
74
75
77
Accessory list for the coming installation steps.
A
B
A’
B’
A=A’
B=B’
4
Wood dowel (6x50mm)
2
Wheel (115mm)
2
LockNut (4mm)
2
PVC
2
Bushing (8X4mm)
Cut off the surplus PVC part carefully along the shaded line
Cut away the film on the position for the air retract
landing and epoxy the wheel house to relevant position.
1
Rib template (2mm ply)
TP Screw (2.3x12mm)
1.5mm
3mm
8
TP Screw (2.3x12mm)
Rod (2.5x300mm)
Washer
Lock Nut (4mm )
Clevis
Clevis
Nut (3mm )
Collar (3mm)
Screw (3x10mm)
Screw (4x40mm)
2
2
Screw (4x40mm)
2
Washer(4x15mm)
Lock Nut (4mm )
2
Washer(4x15mm)
2
Clevis
2
Clevis
2
2
Screw (3x10mm)
Nut (3mm )
2
Collar (3mm)
2
Rod (2.5x300mm)
Rod (2.5x300mm)
Clevis
Clevis
Lock Nut (3mm )
Screw (3x10mm)
Nut (3mm )
Screw (4x40mm)
Washer
1
Stab joiner (30x680mm)
12
TP Screw (3x20mm)
12
Washer(3x6mm)
28
TP Screw (2.3x12mm)
2
Screw (6x50mm)
Washer(4x15mm)
Washer(4x15mm)
3mm
Install the nylon control horn and connect the linkage.
Secure the servo.Install the nylon control horn and
connect the linkage.
Assembly of the main wings.
Accessory list for the coming installation steps.
3
14
13
11
12
15
