4
EN
Fog and flue gas simulator FS 200
Information about the device
Device description
The device serves the purpose of creating artificial fog by
means of fog fluid.
The fog fluid is sucked in by a pump and then heated. With the
integrated high-performance turbine and the thus producible
pressure the fog can be introduced both over long distances (e.
g. sewage pipes, large halls) and in installations with high
counter-pressure (e. g. flat-roofed constructions). Possible
application purposes are for example leak detection, fire brigade
training exercises, quality inspections, tightness tests etc.
Device depiction
7
6
3
1
2
5
4
2
3
No.
Designation
1
Transport handle
2
(Fold-up) canister holder
3
Air vent with filter
No.
Designation
4
Canister connection
5
Power cable
6
Fog transport hose connection
7
Control panel with protective flap
Control panel
8
9
10
11
12
13
14
15
1
No.
Designation
Meaning
8
On/off
switch
For switching the device on
and off
9
Heating-up phase
indicator Is illuminated when the
device heats up
10
Heating ready
indicator
Is illuminated when the
device has heated up a is
ready for operation
11
Pump
indicator
Is illuminated if the pump is
active and fog emerges
12
Magnetic lock for the
protective flap
Keeps the protective
flap (15) closed
13
Controller for the turbine
Controls the turbine speed
14
Controller for the pump
Controls the flow rate of the
pump
15
Protective flap
Protects the elements of
the control panel against
inadvertent adjustment
