TrojanLabel Trojan 3, Руководство пользователя

Страница: 52 / 91

TrojanThree User Guide Page | 51
11.3.2 Maintenance
Wipe Printhead button
Maintenance module performs printhead wiping 3 times to clean the surface of the printhead.
Light Clean button
Additional maintenance routine for fixing fine streaks and for cleaning printhead surface. Takes
about a minute. Can be run multiple times. Advised to use when automatic maintenance routines
and ink circulations are not enough.
Medium Clean button
Additional maintenance routine for fixing streaks, spitting ink through the nozzles and for cleaning
printhead surface. Takes about 2-3 minutes. More intense form of Light Clean. Advised to use when
automatic maintenance routines, ink circulations and Light Cleanings are not enough to recover
print quality. Usually when medium clean is needed, it is the sign of the particular printhead is
getting aged.
Heavy Clean button
Additional maintenance routine for fixing serious streaks and nozzle dehydration. Heavy cleaning
takes about 5 minutes. Only advised to use when Medium clean does not prove to be enough to
recover print quality. Heavy cleaning creates significant amount of waste ink as it is doing a heavy
pressure prime and heavy spit of ink. Running a heavy clean is only advised when the particularly
installed printhead is heavily dehydrated or nearly reached the end of life.
TIP: Rather use 2 medium cleans prior to doing a heavy clean. Heavy clean is for recovering badly
dehydrated printheads only, not against small stripes on the printed labels.