TrojanLabel Trojan 3, Руководство пользователя

Страница: 58 / 91

TrojanThree User Guide Page | 57
11.3.6 Media Settings
Media Settings Basic:
NOTE: For TrojanThree OP version, Continuous and Blackmark mode is not available (only at LP version
software). At OP version the TOF mode is always set to diecut as printing is done on size cut packaging
materials, no roll media is applied.
•
TOF mode: TOF (Top Of Form) depending on used label media:

Continuous (no gaps between labels, roll media format only)

Diecut (gaps between labels, either pre die-cut roll media or packaging materials)

Blackmark (pre-printed blackmarkings on the media, blackmarks can be outside or inside on
roll.)
• TOF offset (mm): Top Of From (top of label) can be +/- depending on moving the top of the image
up or down on label. NOTE: limits -160mm

+160mm
• BOF offset (mm):
Bottom of Form (bottom of label) can be +/- depending on moving the bottom of
the image up or down on label.
NOTE:
limits 0mm

100mm
•
Left offset (mm): Moving printed image towards left or right compared to the left edge of the
printhead. NOTE: limits -127mm

222mm
Save as profile Delete Profile
Save & Apply Saved Profiles List