TrojanLabel Trojan 3 Скачать руководство пользователя страница 19

Страница: 19 / 91

TrojanThree User Guide

Page | 18

NOTE:

Dispose of the removed strip immediately and do not allow the removed strip to contact

the electrical contacts or the printhead nozzles.

IMPORTANT:

Do not throw away the printhead packaging.

The white box has the serial number,

part number and manufacturing date of the printhead. Also it is recommended to store

printheads which are currently not installed in the original packaging.

•

Installing printhead:

Open cover lid on TrojanThree to gain access to the print engine.

CAUTION!

•

DO NOT touch the printhead cartridge’s ink couplings, nozzle surface or the

electrical contacts when installing the printhead cartridge. Hold the printhead

cartridge ONLY by the handles.

•

DO NOT unpack the printhead cartridge until the machine is ready for

installation. Once unwrapped, delay in installing the printhead can

compromise print quality due to dehydration.

•

DO NOT place an unwrapped printhead on any surface before installing.

Protect the printhead at all times from dust, fibers, dirt and other

contaminants.

Содержание Trojan 3




























































































Результаты поиска

Содержание Trojan 3

Отзывы:

Похожие инструкции для Trojan 3

Бренды по названию

Популярные бренды

TrojanLabel Trojan 3, Руководство пользователя

Результаты поиска

Содержание Trojan 3

Отзывы:

Похожие инструкции для Trojan 3

Бренды по названию

Популярные бренды