TrojanLabel Trojan 3, Руководство пользователя

Страница: 22 / 91

TrojanThree User Guide Page | 21
4 Integrating the TrojanThree OEM Print Module
The TrojanThree Digital Over-Printer can be integrated into 2 types of applications. These are:
1. Over Printer (OP) application where the TrojanThree is installed on the top of a conveyor system and
printing on packaging materials directly.
2.
Label Printer (LP)
application where the TrojanThree is installed into existing finishing lines or flexo
press lines to print labels as a roll to roll application using the web path system of the certain
application
Each type of application has different requirements for integrating the TrojanThree from the physical
build to synchronization of printing speed with the conveyor or web path movement. This section is only
presenting the applications as the physical integration of the TrojanThree is done by the local Trojanlabel
distributor or by Trojanlabel directly in areas where there is no official Trojanlabel partner. Trojanlabel has
a separate technical integration document for detailed description and technical specification.
4.1 Over printer (OP) version
Example: TrojanThree built on a mail table to print on packaging materials or envelopes
Requirements:
The speed of the conveyor belt has to be able to do 9 meters / minute (6ips) or 18 meters / minute (12ips)
constant speeds. The movement speed of the conveyor belt has to be synchronized with the TrojanThree
printing speed.
Unique features:
•
Media Present sensor (optional) can be connected to deliver media present signal to TrojanThree
•
Job Ready Indicator LED (optional) for indicating when the TrojanThree is ready to print
•
Print Engine Bracket (optional) for fixing the print engine module to the conveyor belt system
•
Printing on typically non ink jet coated stock of packaging materials or envelopes (certain materials
must be tested for ink compatibility)