LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
78
Version
of
【
Main Board
】
can be upgraded by
【
UDisk file
】
to the newest one.
（
Refer to
7.4.1.3
System upgrade file
）
7.5 Z/U axis
Under the main interface, press
:
Press
or
to move cursor to select one item
When select
【
Auto focus
】
and press
, Z-axis will move at the speed of
【
Z-axis reset speed
】
(Refer to: 3.3.3.2), stop till touch Z+ limit switch, and then move the distance as in
【
Focus distance
】
in
opposite direction.(Refer to: 7.4.2)
When select
【
ZU move
】
,and press
or
, Z-axis starts to move, release
or
, Z-axis
stops moving.
Press
or
, U-axis starts to move, release
or
, U-axis stops moving.
7.6 Files system
Under the main interface, press
to enter into
【
file
】
interface:
