53
7.6.4.7 Push Notification
[Enable]
Enable task.
[Schedule]
Option to choose always or set a particular schedule. Check Schedule setup to select the right
schedule ID for your task.
[Task]
Task function. Click on the task to login the task setting screen above.
Click
Apply
to confirm your setting
[Post time]--
The number of seconds that the camera should keep alarm message sending after motion
stops. If there is any motion within this time the camera will keep sending alarms until there is no motion
for the duration of this parameter. It can be from 5 seconds to 24 hours.
[
Alarm Interval]--
Number of seconds for which the camera should stop sending alerts after the first set.
Setting the time to 0 disables this feature. It allows you to designate a time (in seconds) during which new
alerts are suppressed. For example, if you want to avoid a flood of alerts, you could set this time to 3600
seconds so that after a motion detection event you wouldn’t get any new alerts for at least 1 hour.
