42
7.6.3 Schedule Setup
The alarm that the motion detection triggers can be set to be active or inactive at certain times of the
week.
By default, the schedule is set to be “active” at all times “always”. However you can set the schedule to
trigger alarms at certain times (useful for instance from 11pm until 5.30am).
1.
Elect Schedule ID (1-4)
2.
Ticking the 1
st
‘Enable’ box to activate the alarm on the specific times, enter 23:00 pm to 24:00pm. Ticking
the ‘Day’ box
activate the alarm daily on the specified times from Monday to Sunday
3.
Ticking the 2
nd
‘Enable’ box to activate the alarm on the specific times, enter 00:00 am to 05:00 am.
Ticking the ‘Day’ box activate the alarm daily on the specified times from Monday to Sunday
4.
Click “Apply” to store your settings.
You can set up to 4 schedules.
[
Schedule ID]
Select the ID, you can save up to 4 schedules and use them for different purposes.
[No.]
Setup the specified times in every Schedule ID, you can save up to 8 specified times
[Enable]
Activates the alarm on specified times. Ticking this box to activate the alarm on the specified
times.
[Start time]
Start time of the alarm.
[End time]
End time of the alarm.
[Days]
Ticking this box
activate the alarm daily on the specified times from Monday to Sunday.
Click
Apply
to confirm your setting
