57
Maintenance and Adjustment
NOTE
• The actual level is indicated
when the motorcycle is
upright, (not on the side
stand) and when the filler cap/
dipstick has been pushed
fully home.
Remove the filler cap/dipstick.
The maximum oil level is indicated by
a mark on the filler cap/dipstick.
When the oil level is correct, the
indicated oil level must be between
the maximum and minimum lines on
the dipstick.
If the oil level is too low, add oil a little
at a time until the correct level is
reached.
Once the correct level is reached, fit
the filler cap/dipstick.
Oil and Oil Filter Change
1 Oil tank drain plug
2 Front sump drain plug
3 Rear sump drain plug
4 Oil filter cover
The engine oil and filter must be
replaced
in
accordance
with
scheduled maintenance require-
ments.
Because this motorcycle has a dry-
sump lubrication system, the oil
change procedure differs from those
many will be familiar with. This is
because the majority of the oil is
contained in the oil tank on the left
side of the engine, not in the sump.
To change the engine oil and filter,
follow the instructions below/over.
1
2
3
4
ccva
Classic Cycles Technical Resources