85
Maintenance and Adjustment
Headlights
NOTE
• The vertical beams of the left
and right hand headlights can
only be adjusted together.
Independent adjustment is
not possible.
Headlight Vertical Adjustment
1 Vertical beam adjuster
Switch the headlight dipped beam on.
Remove the adjuster cover.
Slacken the clamp bolt sufficient to
allow restricted movement of the
headlights.
Adjust the position of the headlights
to give the required beam setting.
Tighten the clamp bolt to 15 Nm.
Re-check the headlight beam
settings.
Switch the headlights off when both
beam settings are satisfactorily set.
Warning
Adjust road speed to suit the
visibility and weather conditions in
which the motorcycle is being
operated.
Ensure that the beams are
adjusted to illuminate the road
surface sufficiently far ahead
without dazzling oncoming traffic.
An incorrectly adjusted headlight
may impair visibility causing an
accident.
Warning
Never attempt to adjust a headlamp
beam when the motorcycle is in
motion.
Any attempt to adjust a headlamp
beam when the motorcycle is in
motion may result in loss of control
and an accident.
Classic Cycles Technical Resources
