75
Maintenance and Adjustment
NOTE
• The details given in the table
are to be used as a guide only
where
the
rider
and
passenger each weigh 90 kg
or less. Setting requirements
should be increased for
heavier
riders
and
passengers and according to
personal preferences.
Final Drive Unit
Other than checking and changing
the final drive oil level, the unit
contains no user serviceable parts. If
a fault occurs with the final drive unit,
your Triumph dealer must replace the
complete assembly.
Check the final drive unit for oil leaks
in accordance with the scheduled
maintenance chart.
Final Drive Oil Level
Adjustment
1 Final drive unit
2 Oil level/filler plug
To check the oil level in the final drive
unit, remove the filler/level plug. Fill
with Mobilube 1 SHC 75W/90 fully
synthetic hypoid oil (or equivalent)
until the level of oil inside the unit is
level with the bottom of the filler.
Refit the plug and tighten to
60 Nm
.
Warning
Under no circumstances should the
final drive unit be disassembled.
Failure to observe the above
warning could lead to a malfunction
of the final drive unit causing lock-
up of the rear wheel leading to loss
of motorcycle control and an
accident.
Classic Cycles Technical Resources
