97
Maintenance and Adjustment
Street Triple and Street Triple R
The expansion tank cap can be located at the
left hand side of the motorcycle, adjacent to
the side stand.
Remove the cap from the expansion tank
and add coolant mixture through the filler
opening until the level reaches the MAX
mark. Re-install the cap.
1.
Coolant expansion tank
2. Coolant expansion cap
3. Upper fluid level
4. Lower fluid level
All Models
Note:
•
If the coolant level is being checked
because the coolant has overheated,
also check the level in the radiator
and top off if necessary.
•
In an emergency, distilled water can
be added to the cooling system.
However, the coolant must then be
drained and replenished with HD4X
Hybrid OAT coolant as soon as
possible.
Caution
If the coolant level is found to be low, or if
coolant has to be added regularly, inspect
the cooling system for coolant leaks. If
necessary, pressure test the system to
locate the source of the leak and rectify as
necessary. Loss of coolant may cause the
engine to overheat and suffer severe
damage.
chrw
4
3
1
2
Caution
If hard water is used in the cooling system,
it will cause scale accumulation in the
engine and radiator and considerably
reduces the efficiency of the cooling
system. Reduced cooling system efficiency
may cause the engine to overheat and
suffer severe damage.
