103
Maintenance and Adjustment
Chain Free-Movement Adjustment
Street Triple and Street Triple R
The vertical movement of the drive chain
must be in the range 0.5-0.9 in (13 - 32 mm).
Daytona 675 and Daytona 675 R
The vertical movement of the drive chain
must be in the range 1.1-1.5 in (28 - 38 mm).
1.
Adjuster bolt
2. Adjuster bolt lock nut
3. Rear wheel spindle nut
Loosen the wheel spindle nut.
Release the lock nuts on both the left hand
and right hand chain adjuster bolts.
Moving both adjusters by an equal amount,
turn the adjuster bolts clockwise to increase
chain free-movement and counter-clockwise
to reduce chain free-movement.
When the correct amount of chain
free-movement has been set, push the wheel
into firm contact with the adjuster. Tighten
both adjuster lock nuts to
20 lbf-ft (27 Nm)
and the rear wheel spindle nut to
81 lbf-ft
(110 Nm)
.
Repeat the chain adjustment check. Re-adjust
if necessary.
Check the rear brake effectiveness. Rectify if
necessary.
1
chre
2
3
Warning
Operation of the motorcycle with insecure
adjuster lock nuts or a loose wheel spindle
may result in impaired stability and
handling of the motorcycle. This impaired
stability and handling may lead to loss of
control or an accident.
Warning
It is dangerous to operate the motorcycle
with defective brakes and you must have
your authorized Triumph dealer take
remedial action before you attempt to ride
the motorcycle again. Failure to take
remedial action may reduce braking
efficiency leading to loss of control or an
accident.
