42
General Information
Lap Timer
1.
Display screen
2. Button A
The lap timer will provide the following
information: lap time, number of laps,
average speed, maximum speed and
distance travelled. Each display provides the
following information:
Lap Time
The elapsed time of the lap (the lap number
will be displayed in the speedometer display).
Information is recorded for each lap since the
last reset.
Note:
•
The lap timer will reset to zero after
100 minutes.
Number of Laps
The number of recorded laps since the last
reset is displayed. A maximum of 50 laps can
be stored by the lap timer.
Maximum Speed
The maximum speed achieved per lap and
the lap number.
Average Speed
The average speed per lap and the lap
number.
Distance Travelled
The distance travelled per lap and the lap
number.
Turning the Lap Timer On or Off
To switch the lap timer on or off, with the
motorcycle stationary and in neutral turn the
ignition to the ON position.
Press and release button 'A' until set up is
visible in the display screen. Then press
button 'B'.
Press and release button 'A' until Lap is visible
then press button 'B'. ON or OFF will flash in
the display screen.
Press button 'A' to select the desired display
then press button 'B'. Do not touch
buttons 'A' or 'B' until Lap is visible in the
display. Then press and release button 'A'
until rEturn is visible then press button 'B'.
Trip 1 will be visible in the display screen.
The lap timer has two modes; data recording
mode and data retrieval mode.
2
cfio
1
Warning
Do not attempt to switch between lap
timer display modes with the motorcycle in
motion as this may lead to loss of
motorcycle control and an accident.
