TRIUMPH BOARD PJ200, Руководство пользователя

Страница: 29 / 70

26
English
User Controls
Menu Tree
Main Menu Sub Menu Settings
Image Display Mode
Brightness -50~50
Contrast -50~50
Sharpness 1~15
Color -50~50
Tint -50~50
Advanced Gamma Film / Video / Graphics / PC
BrilliantColor™ 0~10
Color Temp. Warm / Medium / Cold
Color Settings
Color Space AUTO / RGB / YUV
Input Source VGA1 / VGA2 / Video / S-Video / HDMI
Image AI On / Off
Exit
Display Format 4:3 / 16:9-I / 16:9-II / Native / AUTO
4:3 / 16:9 or 16:10 / LBX / Native / AUTO
Edge Mask 0~10
Zoom -5~25 (80%~200%)
H Image Shift -50~50
V Image Shift -50~50
V Keystone -40~40
3D 3D Off / DLP-Link / IR
3D Sync. Invert On / Off
Exit
Setup Language
Screen Type 16:10 / 16:9
Projection
Menu Location
Signal Automatic On / Off
Phase (VGA) 0~31
Frequency (VGA) -5~5
H. Position (VGA) -5~5
V. Position (VGA) -5~5
Exit
Security Security On / Off
Security Timer Month / Day / Hour
Change Password
Exit
Presentation / Bright / Movie / sRGB /
Blackboard / Classroom / User / 3D
#1
#1
Red Gain / Green Gain / Blue Gain / Red
Bias / Green Bias / Blue Bias / Cyan /
Magenta / Yellow / Reset / Exit
#2
#3
#4
English / Deutsch / Français / Italiano /
Español / Português / Svenska /
Nederlands / Norsk/Dansk / Polski /
Suomi / / / Magyar /
eština / / / / /
/ / Türkçe / Vi t /
Bahasa Indonesia
#3
#5
27
English
User Controls
Main Menu Sub Menu Settings
Setup Projector ID 0~99
Mute On / Off
Volume 0~10
Audio Input
Advanced Logo Optoma / Neutral / User
Logo Capture
Closed Captioning
Off / CC1 / CC2
Exit
Network Network State
DHCP
IP Address
Subnet mask
Gateway
DNS
Apply
Yes / No
Exit
Options Source Lock On / Off
High Altitude On / Off
Information Hide On / Off
Keypad Lock On / Off
Background Color Black / Red / Blue / Green / White
IR Receiver Front Receiver On / Off
Top Receiver On / Off
Advanced Direct Power On On / Off
Auto Power Off (min.) 0~180
Sleep Timer (min.) 0~995
Power Mode (Standby) Eco. / Active
Exit
Lamp Settings Lamp Hours
Lamp Reminder
On / Off
Brightness Mode STD / Bright / Image AI
Lamp Reset Yes / No
Exit
Reset Dust Filter Yes / No
Reset
#6
Default / Audio1(Phone jack) / Audio2
(RCA R/L)

Please note that the on-screen display (OSD) menus vary according to the
signal type selected and the projector model you are using.

(
#1
) “Color” and “Tint” are only supported in Video mode.

(
#2
) For XGA model only.

(
#3
) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” setting.

(
#4
) “3D Sync Invert” is only available when 3D is enabled.

(
#5
) “Signal” is only supported in Analog VGA (RGB) signal.

(
#6
) MIC volume can also be controlled by “Setup

Volume” in OSD.