TRIUMPH BOARD PJ200, Руководство пользователя

Страница: 41 / 70

38
English
User Controls
SETUP
Volume

Press the to decrease the volume.

Press the to increase the volume.
Audio Input
The default audio settings are on the back panel of the
projector. Use this option to reassign any of the Audio Inputs
(1 or 2) to the current image source. Each Audio input can be
assigned to more than one video source.
 Audio 1: VGA 1 and VGA 2.
 Audio 2: S-Video/Video.
 MIC: (No default video source)

Volume adjustment
can also control MIC
volume.
39
English
User Controls
SETUP | Signal
(RGB)
Automatic
Automatically selects the signal. If you use this function, the
Phase, frequency items are grayed out, and if Signal is not auto-
matic, the phase, frequency items will appear for user to manually
tune and saved in settings after that for next time projector turns
off and on again.
Phase
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or flickers, use this function to
correct it.
Frequency
Change the display data frequency to match the frequency of
your computer’s graphic card. Use this function only if the image
appears to flicker verticall y.
H. Position

Press the to move the image left.

Press the to move the image right.
V. Position

Press the to move the image down.

Press the to move the image up.

“Signal” is only
supported in Analog
VGA (RGB) signal.