TRIUMPH BOARD PJ200, Руководство пользователя

Страница: 16 / 70

14
English
Installation
or
Powering the projector On / Off

Turn on the
projector first and
then select the
signal sources.
Powering On the Projector
1. Securely connect the power cord and signal cable. When
connected, the POWER/S TANDBY LED will turn Ambe r .
2. T urn on the lamp by pres sing “ ” button either on the top of
the projector or on the remote. The POWER/S TANDBY LED
will now turn Green.
The startup screen will di s play in approximately 10 seconds.
The first time you use the projecto r , you will be asked to
select the preferred language and power saving mode.
3. T urn on and connect the source that you want to display
on the screen (computer , notebook, video playe r , etc). The
projector will detect the source automaticall y . If not, push
menu button and go to “OPTIONS”.
Make sure that the “Source Lock” has been set to “Off”.

If you connect multiple sources at the same time, press the
“SOURCE” button on the control panel or direct source keys
on the remote control to switch between inputs.

When Power mode
(Standby) is set
to Eco (<1W), the
VGA output, Audio
pass-through
and RJ45 will be
deactivated when
the projector is in
standb y .