Triumph Adler CLP 4526, Инструкция по эксплуатации

Страница: 90 / 156

3.10 Paper Handling
3-50
7 77 7
When the desired paper type is displayed, press the
ENTER key. The paper type is set to the MP tray.
8
88
8
To exit the menu selection, press the MENU key.
3.10.4 Setting the Cassette Paper Type
After you assign a paper type to each of the paper cassettes,
the printer will automatically select the correct cassette in
accordance with the paper type you specify on your
computer for printing. The default setting for all paper
cassettes is plain paper.
If you have an optional paper feeder installed on your printer,
you can also use this procedure to specify the paper type of
the paper feeder paper cassette.
For more information about paper types, see Chapter 2
Handling Paper .
1 11 1
Press the MENU key.
2 22 2
Press the
U
or
V
key repeatedly until
Paper
Handling >
appears.
3
33
3
Press the
Z
key.
4
44
4
Press the
U
or
V
key repeatedly until >Cassette
# Type
appears. (Where
#
here refers to the cassette
number.)
Note
When the optional Duplex Unit (DU-640) is
installed, the duplex drawer takes up the space
of topmost cassette. Because of this, cassette
numbering starts from 2.
5 55 5
To change paper type, press the ENTER key. A
blinking question mark (
?
) appears.
6 66 6
Press the
U
or
V
key to display the desired paper
type. The message display toggles through the
following paper types:
Plain
Preprinted
Bond
Recycled
Vellum
Letterhead
Color
Prepunched
High quality
Custom 1 (to 8)
7
77
7
When the desired paper type is displayed, press the
ENTER key.
8 88 8
To exit the menu selection, press the MENU key.
3.10.5 Selecting the Paper Feed Source
You can select the paper source using the operator panel,
from which the printer feeds paper as the default. If an
optional paper feeder(s) is installed, it is also available for the
default paper source.
1 11 1
Press the MENU key.
2 22 2
Press the U or V key repeatedly until
Paper
Handling >
appears.
3
33
3
Press the
Z
key.
4
44
4
Press the
U
or
V
key repeatedly until > Feed
Select
appears.
5 55 5
To change the current paper feed source, press the
ENTER key. A blinking question mark (
?
) appears.
Paper Handling >
>Cassette 1 Type
Plain
>Cassette 1 Type
? Plain
Paper Handling >
>Feed Select
Cassette 1
>Feed Select
? Cassette 1