Triumph Adler CLP 4526 страница 3 Скачать руководство пользователя | Manualshive

Страница: 3 / 156

background image

ii

Caution

NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION.

Notice on Software

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION MODE. The printer
is factory-set to emulate the PCL. The emulation mode can be changed by following the procedures described in

Chapter 3

.

Notice

The information in this guide is subject to change without notification. Additional pages may be inserted in future
editions. The user is asked to excuse any technical inaccuracies or typographical errors in the present edition.
No responsibility is assumed if accidents occur while the user is following the instructions in this guide. No responsi-
bility is assumed for defects in the printer's firmware (contents of its read-only memory).
This guide, any copyrightable subject matter sold or provided with or in connection with the sale of the page printer,
are protected by copyright. All rights are reserved. Copying or other reproduction of all or part of this guide, any
copyrightable subject matter without the prior written consent of Kyocera Mita Corporation is prohibited. Any copies
made of all or part of this guide, any copyrightable subject must contain the same copyright notice as the material from
which the copying is done.

Regarding Tradenames

PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL is trademark of Kyocera Corporation.
Diablo 630 is a product of Xerox Corporation. IBM Proprinter X24E is a product of International Business Machines
Corporation. Epson LQ-850 is a product of Seiko Epson Corporation.
Hewlett-Packard, PCL, and PJL are registered trademarks of Hewlett-Packard Company. Centronics is a trade name
of Centronics Data Computer Inc. PostScript is a registered trademark of Adobe Systems Incorporated. Macintosh is
a registered trademark of Apple Computer, Inc. Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation. PowerPC and Microdrive are trademarks of International Business Machines Corporation.
CompactFlash is a trademark of SanDisk Corporation. ENERGY STAR is a U.S. registered mark. All other brand and
product names are registered trademarks or trademarks of their respective companies.
This Kyocera Mita page printer uses PeerlessPrintXL to provide the HP LaserJet compatible PCL 6 language emula-
tion. PeerlessPrintXL is a trademark of The Peerless Group, Redondo Beach, CA 90278, U.S.A.
This product was developed using the Tornado™ Real Time Operating System and Tools from Wind River Systems.

This product contains UFST™ and MicroType® from Agfa Monotype Corporation.

«
1
2
3
4
5
...
»

Содержание CLP 4526





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для CLP 4526

Бренд: D-Link Страницы: 38

Epress EtherNetwork DP-301P+

Бренд: D-Link Страницы: 2

Бренд: Oki Страницы: 2

PAPERANG MonoSnap Lite

Бренд: Xiamen Страницы: 7

WorkCentre M118i

Бренд: Xerox Страницы: 5

Бренд: oliser Страницы: 20

Бренд: Xerox Страницы: 6

Бренд: 3nStar Страницы: 8

Бренд: U-Line Страницы: 30

Бренд: Oki Страницы: 83

Бренд: Lexmark Страницы: 142

Бренд: IBM Страницы: 2

Бренд: MIMAKI Страницы: 30

Бренд: Xprinter Страницы: 40

Бренд: Muton Страницы: 30

Бренд: Brother Страницы: 144

Бренд: Brother Страницы: 276

Бренд: Brother Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды