Triumph Adler CLP 4526, Инструкция по эксплуатации

Страница: 76 / 156

3.6 Making Default Settings
3-36
Character pitch for Courier/Letter Gothic
You can set the character pitch for fixed fonts when the
default font is Courier or Letter Gothic.
1 11 1
Press MENU key.
2 22 2
Press the
U
or
V
key repeatedly until
Font >
appears.
3
33
3
Press the Z key. Press the U or V key until
>Font
Select >
appears.
4 44 4
Make sure that
Internal
is displayed and press the
Z key.
5 55 5
Press the
U
or
V
key repeatedly until
>>Pitch
appears.
6
66
6
Press the
ENTER
key. A blinking cursor ( _ ) appears.
7 77 7
Press the U or V key to increase or decrease the
value at the blinking cursor. The character pitch can
be set between 0.44 and 99.99 characters per inch, in
0.01 character-per-inch increments. Use the
Z
or
Y
key to move the cursor right and left.
8 88 8
When the desired size is displayed, press the ENTER
key.
9
99
9
Press the
MENU
key. The display returns to Ready .
Setting the character code set
You can change the character code set. Available character
code sets vary depending on the current font. (The default
character code set is
IBM PC-8
.)
1 11 1
Press the MENU key.
2 22 2
Press the
U
or
V
key repeatedly until
Font >
appears.
3 33 3
Press the Z key.
4 44 4
Press the U or V key repeatedly until
>Code Set
appears.
5 55 5
Press the ENTER key. A blinking question mark (
?
)
appears.
6
66
6
Press the
U
or
V
key until the desired character code
set appears.
7 77 7
Press the ENTER key.
8 88 8
Press the MENU key. The display returns to
Ready
.
Printing lists of fonts
To help you decide in selecting a font, you can printout lists
of the internal fonts or the optional fonts including
downloaded fonts. Samples for font lists are shown in
Figure 3-10 on page 3-37 .
1 11 1
Press the MENU key.
2 22 2
Press the
U
or
V
key repeatedly until
Font >
appears.
Font >
>Font Select >
Internal
>>Pitch
10.00 cpi
>>Pitch
10.00 cpi
Font >
>Code Set
IBM PC-8
>Code Set
?IBM PC-8
Font >