Triumph Adler CLP 4526, Инструкция по эксплуатации

Страница: 117 / 156

4.3 Error Messages
4-9
Memory overflow
Press GO
The printer does not have enough memory. You can print a status page to
check the current memory level.
Try adding more memory. Press the GO key to resume printing.
You can cancel the print job by pressing the CANCEL key.
If Auto Continue is on, printing will resume automatically after a preset
amount of time. For details about Auto Continue, refer to
3.13.8 Auto Con-
tinue Setting on page 3-62 .
MemoryCard err##
Press GO
A memory card error of the type indicated by the error code that appears in
place of
## has occurred. Refer to Storage error codes on page 4-11 for
information about error codes. To ignore the memory card disk error, press
the
GO
key.
Missing
chad box
The chad box is not installed correctly. Install the chad box correctly.
Missing
duplex drawer
The duplex unit is not installed. Install the duplex unit.
Missing
folding unit
The optional folding unit is not installed correctly. Install the optional fold-
ing unit correctly.
Missing folding
unit tray
The folding unit tray is not installed correctly. Install the folding unit tray
correctly.
Missing
toner container
Color
#######
Install the toner container of a toner kit for the color indicated in place of # .
The printer will not operate while this message is displayed.
Missing waste
toner box
The waste toner box is not installed. Install a waste toner box.
Paper jam
###############
A paper jam has occurred at the location indicated in place of
############### . For details, see Section 4.4 Clearing Paper Jams on
page 4-12 .
RAM disk error##
Press GO
A RAM disk error of the type indicated by the error code that appears in
place of
##
has occurred.Refer to Storage error codes on page 4-11 . To
ignore the RAM disk error, press the GO key.
Remove paper
Finisher tray ##
Paper remains in an option document finisher as displayed in place of ## .
Remove printed pages.
Replace toner
C,M,Y,K
Replace toner
Clean printer
Toner has run out in the indicated toner container(s). Replace the toner con-
tainer using a new toner kit for the particular color. The printer will not oper-
ate while these two messages are alternating on the display. For example, if
Replace toner C,K is displayed, replace the cyan and the black toner
containers.
Replace waste
toner box
The waste toner box is almost full. Replace it.
Message Corrective Action
Table 4-3 (Continued)