Replace the battery compartment cover and secure it in place using the two fixing screws
previously removed.
Ensure that the battery compartment cover sits flush with the rear housing of the Triton
Xerophyte Controller Unit and that both retaining screws are tight (Fig 20).
Connect the data cable connector lead from the Triton Xerophyte Controller Unit to the
data cable protruding from the fixing
bracket (Fig 21).
Do not over tighten the screws.
On the ends of both the data cable and data cable connecting lead are screw connectors,
which provide a watertight seal. To ensure that the connectors are correctly assembled and
sealed, first ALIGN the two arrows on both connectors so that they point towards one another,
And then follow the 3 steps in Fig 22.
Fig 20
1
Triton Xerophyte
Controller Installation
25
Fig 22
Fig 21
2
3
