Fig 24
Attach the Triton Xerophyte Controller Unit to the fixing bracket. Whilst doing so push the excess
data cable/data cable connection lead through the hole within the fixing bracket, and back into
the wall cavity.
Fit Triton Xerophyte Controller Unit cut-outs over the bracket fixing lugs (Fig 23) and slide down
into place. Secure with the single screw at the bottom of the Triton Xerophyte
Controller Unit
(Fig 24).
DO NOT overtighten the screw.
DO NOT turn on the electricity supply to the Triton Xerophyte Mixer until commissioning.
Triton Xerophyte Controller Unit fitting (Wireless Connectivity Only)
Triton recommend wired installation, as wireless transmissions MAYBE BLOCKED from the
Triton Xerophyte Controller Unit and thus prevent correct operation of the shower. Should it
be necessary to rely on wireless connectivity, then it is important to wait until AFTER
commissioning before deciding on the final location of the Triton Xerophyte Controller Unit
and drilling any holes for installing the Controller Unit’s fixing bracket. The best and final
location to place the Triton Xerophyte Controller Unit will need to be first tested to ensure
there is a strong and consistent wireless signal between the Controller Unit and the Triton
Xerophyte Mixer Unit.
The Triton Xerophyte Controller Unit should be installed no more than approximately 10-
metres from the Triton Xerophyte Mixer Unit. The ideal location to mount the Triton
Xerophyte Controller Unit is on the wall at a convenient place inside the enclosure whereby
the user can easily start and stop the shower but also have easy access before entering the
shower to activate the war-up procedure.
Triton Xerophyte
Controller Installation
26
Fig 23
