If installing the Triton Xerophyte Controller Unit onto a tiled wall, always mount the fixing
bracket on the surface of the tiles. NEVER tile up to the Triton Xerophyte Controller Unit.
Triton Xerophyte Controller Unit fitting (Wired Connectivity Only)
Remove the battery compartment cover on the rear of the Triton Xerophyte Controller Unit
by undoing the two fixing screws (Fig 17).
Using a pair of side cutters remove the battery compartment cover from the small plastic
tag as shown (Fig 18).
Triton Xerophyte
Controller Installation
24
Fig 17
Fig 19
Connect the 3 pin coupler of the data cable connector Lead into the connector located on the
PCB within the Triton Xerophyte Controller Unit. Very carefully push the connector lead into
the grooves and slot of the battery compartment (Fig 19).
The 3 pin coupler can ONLY be fitted one way into the PCB connector. Take care to ensure
that the coupler pins properly align with the connection port on the Triton Xerophyte
Controller Unit to guard against damaging the pins or weakening the connection
Fig 18
